Air pollution control equipment for mining and metals must capture heavy, abrasive dust and fine metal fumes from large, hot gas streams with fluctuating flow rates and compositions. In ore processing, the primary concern is particulate removal. In smelting, steelmaking, and metal recovery, acid gases, VOCs, and submicron fumes may also need to be controlled.
In precious metals recovery, the material captured by the scrubber is valuable product, making capture efficiency a measure of both product yield and emissions compliance. PCC designs and supplies the venturi scrubbers, absorbers, and oxidizers for these applications as complete systems, including fans, ductwork, stacks, and support structures.
High-energy venturi scrubbers that recover precious metal particulate while controlling emissions
Basic Oxygen Furnace venturi designs for gas volumes up to 1,000,000 acfm and heavy dust loadings
Flooded wall venturis for high dust loading and hygroscopic dust
Open liquid feed pipes with no spray nozzles to plug or erode, as well as a flooded elbow that cushions abrasive particulate
Alloy materials and linings selected to resist corrosion and abrasion
Integrated Train:
Quencher venturi for high-temperature gas
Venturi and cyclonic separator with a recycle pump system for particulate
Absorber stage for SO₂, HCl, and HF (acid gas control)
Wet electrostatic precipitator as the final stage for metal fume and mist
Contact us by phone at 1 (412) 655-0955 or request an engineering consultation to discuss your metals or mining application.
Need Information? Tell us your request.
"*" indicates required fields
Why Metals and Mining Exhaust Is Hard to Control
The dust load is the first problem. Ore dryers, reduction furnaces, and steelmaking vessels can produce far more particulate per cubic foot than most process exhaust, and the particles can be abrasive enough to wear through steel components. Gas flow also varies with the process, rising and falling with each furnace heat or dryer load. An adjustable venturi throat helps maintain removal efficiency as the gas volume changes, and wetted surfaces and linings help protect against abrasion.
The second problem is what the dust contains. EPA’s integrated iron and steel standards cover sinter plants, blast furnaces, and basic oxygen furnace shops, where the hazardous air pollutants are primarily metals, including manganese and lead. Taconite iron ore processing has its own standard. These metals can leave the process as particulate, including fine particles, making particulate collection an important part of emissions compliance.
Metals and Mining Processes and the Equipment PCC Applies
| Process | What the Exhaust Carries | Equipment | Reference Point |
|---|---|---|---|
| ✓ Iron ore reduction and oxide dryer dedusting | Heavy iron ore dust | Venturi with cyclonic separator | Six venturi systems at one iron ore reduction plant treat 418,000 scfm in total |
| ✓ Basic oxygen furnace steelmaking | Very high gas volume and dust loading | Basic Oxygen Furnace venturi | Designs up to 1,000,000 acfm |
| ✓ Precious metals recovery | Fine particulate that is the product | High-energy venturi | Run at high efficiency to maximize metal retrieval |
| ✓ Aluminum production | HF and SO2 | Open spray tower acid gas absorber | Tolerates high gas temperatures and dust loads |
| ✓ Smelting and other non-ferrous production | Metal fume and acid mist | Wet electrostatic precipitator as the polishing stage | Heavy metal fume and acid mist removal are established WESP applications |
| ✓ Metal shredding and scrap recycling | VOCs, particulate, HCl, and HF | Upstream particulate control, regenerative thermal oxidizer, and acid gas scrubber | Dual RTO and scrubber system treating 170,000 SCFM at 99.0% destruction removal efficiency |
When the Dust Is the Product
In precious metals recovery, the particulate in the gas stream carries some of the metal the plant is there to produce. A high-energy venturi captures the particulate in the scrubbing liquid, where it can be concentrated in the recirculation loop and removed through a bleed stream for recovery. The permit sets the minimum required collection efficiency. Beyond that, extra throat pressure drop may be justified if the value of the recovered metal exceeds the additional fan energy cost.
Where PCC Metals and Mining Systems Operate
Iron ore reduction and ore drying
Iron and steel production, including basic oxygen furnaces
Precious and specialty metal recovery
Non-ferrous metals, including aluminum, copper, and zinc
Minerals processing
What PCC Needs to Size a System
The source (furnace, dryer, kiln, roaster, or shredder)
and whether it runs in batches or continuously
Gas flow and temperature,
normal and maximum, and how quickly they swing
Dust loading, particle size distribution, and how abrasive the dust is
(particulate matter control covers the selection logic)
Whether the collected material is recovered or disposed of
Acid gases, VOCs, or mist in the same stream
The emission limit that applies
and which rule or permit condition sets it
Water supply, wastewater handling, and any existing fans or stacks to tie into
Where the dust has not been characterized or the process is being changed, an engineering study should be completed first to ensure the equipment is specified based on measured process conditions.
